Opel in the workshop


1800 Insignia have problems at the rear axle, 460 losing more oil to the crankshaft. 3000 Vectra C and Signum are suffering from loss of coolant.

Opel workshops in the coming weeks to get extra work: The Insignia 4×4 provides a clogged vent tube on the rear axle differential gear for a Verunreingigung of the oil and slipping clutch discs. This affects about 1,800 cars of model year 2009th To eliminate the problem, replace the vent hose on the rear differential gear. It takes about half an hour. A further service action concerns the Insignia with a 2.0-liter turbocharged gasoline engine. Due to a manufacturing discrepancy, with a total of 460 vehicles of model year 2009 oil leak on the crankshaft. The workshop will forward Kurbelwellenöldichtring tested for leaks and, if necessary, replaced. For the repair Opel estimated about 50 minutes.
This is for the Opel brand site
Also, the Vectra C and Signum’s Body Variant need in the workshop. Affected are approximately 3,000 vehicles with 2.8-liter V6 from model years 2006 through 2008. There may be due to defects in materials to leak of coolant coming from the expansion tank. In the workshop, the tank is replaced, the workshops planned 30 minutes for this part. Here, too, is a service action.


Yorum bırakın

Henüz yorum yapılmamış.

Comments RSS TrackBack Identifier URI

Bir Yanıt Bırakın

Aşağıya bilgilerinizi girin veya oturum açmak için bir simgeye tıklayın:

WordPress.com Logosu

WordPress.com hesabınızı kullanarak yorum yapıyorsunuz. Log Out / Değiştir )

Twitter resmi

Twitter hesabınızı kullanarak yorum yapıyorsunuz. Log Out / Değiştir )

Facebook fotoğrafı

Facebook hesabınızı kullanarak yorum yapıyorsunuz. Log Out / Değiştir )

Google+ fotoğrafı

Google+ hesabınızı kullanarak yorum yapıyorsunuz. Log Out / Değiştir )

Connecting to %s

  • ana sponsorumuz